Skip to content
GitLab
Commit 126812a9 authored by user2684's avatar user2684
Browse files

Add support for rain gauge sensor #90

parent 38fd51c9
Hide whitespace changes
Inline Side-by-side
NodeManager.cpp
View file @ 126812a9
......@@ -33,6 +33,7 @@ float getVcc() {
#endif
}
/***************************************
PowerManager
*/
......@@ -325,17 +326,17 @@ void SensorAnalogInput::setRangeMax(int value) {
_range_max = value;
}
// what do to during before
// what to do during before
void SensorAnalogInput::onBefore() {
// prepare the pin for input
pinMode(_pin, INPUT);
}
// what do to during setup
// what to do during setup
void SensorAnalogInput::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorAnalogInput::onLoop() {
// read the input
int adc = _getAnalogRead();
......@@ -354,7 +355,7 @@ void SensorAnalogInput::onLoop() {
_value_int = _output_percentage ? percentage : adc;
}
// what do to during loop
// what to do during loop
void SensorAnalogInput::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -428,17 +429,17 @@ void SensorThermistor::setOffset(float value) {
_offset = value;
}
// what do to during before
// what to do during before
void SensorThermistor::onBefore() {
// set the pin as input
pinMode(_pin, INPUT);
}
// what do to during setup
// what to do during setup
void SensorThermistor::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorThermistor::onLoop() {
// read the voltage across the thermistor
float adc = analogRead(_pin);
......@@ -467,7 +468,7 @@ void SensorThermistor::onLoop() {
_value_float = temperature;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorThermistor::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -485,17 +486,17 @@ SensorML8511::SensorML8511(int child_id, int pin): Sensor(child_id, pin) {
setValueType(TYPE_FLOAT);
}
// what do to during before
// what to do during before
void SensorML8511::onBefore() {
// set the pin as input
pinMode(_pin, INPUT);
}
// what do to during setup
// what to do during setup
void SensorML8511::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorML8511::onLoop() {
// read the voltage
int uvLevel = analogRead(_pin);
......@@ -516,7 +517,7 @@ void SensorML8511::onLoop() {
_value_float = uvIntensity;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorML8511::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -546,17 +547,17 @@ void SensorACS712::setOffset(int value) {
_ACS_offset = value;
}
// what do to during before
// what to do during before
void SensorACS712::onBefore() {
// set the pin as input
pinMode(_pin, INPUT);
}
// what do to during setup
// what to do during setup
void SensorACS712::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorACS712::onLoop() {
int value = analogRead(_pin);
// convert the analog read in mV
......@@ -571,11 +572,93 @@ void SensorACS712::onLoop() {
#endif
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorACS712::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
/*
SensorRainGauge
*/
// contructor
SensorRainGauge::SensorRainGauge(int child_id, int pin): Sensor(child_id, pin) {
// set presentation, type and value type
setPresentation(S_RAIN);
setType(V_RAIN);
setValueType(TYPE_FLOAT);
}
// initialize static variables
long SensorRainGauge::_last_tip = 0;
long SensorRainGauge::_count = 0;
// setter/getter
void SensorRainGauge::setReportInterval(int value) {
_report_interval = value;
}
void SensorRainGauge::setSingleTip(float value) {
_single_tip = value;
}
// what to do during before
void SensorRainGauge::onBefore() {
// set the pin as input and enabled pull up
pinMode(_pin, INPUT_PULLUP);
// attach to the pin's interrupt and execute the routine on falling
attachInterrupt(digitalPinToInterrupt(_pin), _onTipped, FALLING);
}
// what to do during setup
void SensorRainGauge::onSetup() {
}
// what to do when when receiving an interrupt
void SensorRainGauge::_onTipped() {
// on tipping, two consecutive interrupts are received, ignore the second one
if (millis() - _last_tip > 100){
// increase the counter
_count++;
#if DEBUG == 1
Serial.println(F("RAIN+"));
#endif
}
_last_tip = millis();
}
// what to do during loop
void SensorRainGauge::onLoop() {
// avoid reporting the same value multiple times
_value_float = -1;
// time elapsed since the last report
long elapsed = millis() - _last_report;
// minimum time interval between reports
long min_interval = ((long)_report_interval*1000)*60;
// time to report
if (elapsed > min_interval) {
// report the total amount of rain for the last period
_value_float = _count*_single_tip;
#if DEBUG == 1
Serial.print(F("RAIN I="));
Serial.print(_child_id);
Serial.print(F(" T="));
Serial.println(_value_float);
#endif
// reset the counters
_count = 0;
_last_report = millis();
}
}
// what to do as the main task when receiving a message
void SensorRainGauge::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) {
// report the total amount of rain for the last period
_value_float = _count*_single_tip;
}
}
/*
* SensorMQ
......@@ -623,18 +706,18 @@ void SensorMQ::setSmokeCurve(float *value) {
_SmokeCurve[2] = value[2];
}
// what do to during before
// what to do during before
void SensorMQ::onBefore() {
// prepare the pin for input
pinMode(_pin, INPUT);
}
// what do to during setup
// what to do during setup
void SensorMQ::onSetup() {
_ro = _MQCalibration();
}
// what do to during loop
// what to do during loop
void SensorMQ::onLoop() {
if (_pin == -1) return;
// calculate rs/ro
......@@ -664,7 +747,7 @@ void SensorMQ::onLoop() {
_value_int = (int16_t)ceil(value);
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorMQ::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -729,17 +812,17 @@ int SensorMQ::_MQGetPercentage(float rs_ro_ratio, float *pcurve) {
SensorDigitalInput::SensorDigitalInput(int child_id, int pin): Sensor(child_id, pin) {
}
// what do to during before
// what to do during before
void SensorDigitalInput::onBefore() {
// set the pin for input
pinMode(_pin, INPUT);
}
// what do to during setup
// what to do during setup
void SensorDigitalInput::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorDigitalInput::onLoop() {
// read the value
int value = digitalRead(_pin);
......@@ -755,7 +838,7 @@ void SensorDigitalInput::onLoop() {
_value_int = value;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorDigitalInput::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -769,7 +852,7 @@ void SensorDigitalInput::onReceive(const MyMessage & message) {
SensorDigitalOutput::SensorDigitalOutput(int child_id, int pin): Sensor(child_id, pin) {
}
// what do to during before
// what to do during before
void SensorDigitalOutput::onBefore() {
// set the pin as output and initialize it accordingly
pinMode(_pin, OUTPUT);
......@@ -779,7 +862,7 @@ void SensorDigitalOutput::onBefore() {
_value_int = _initial_value;
}
// what do to during setup
// what to do during setup
void SensorDigitalOutput::onSetup() {
}
......@@ -799,7 +882,7 @@ void SensorDigitalOutput::onLoop() {
// do nothing on loop
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorDigitalOutput::onReceive(const MyMessage & message) {
if (message.getCommand() == C_SET) {
// retrieve from the message the value to set
......@@ -889,17 +972,17 @@ SensorDHT::SensorDHT(int child_id, int pin, DHT* dht, int sensor_type, int dht_t
}
}
// what do to during before
// what to do during before
void SensorDHT::onBefore() {
// initialize the dht library
_dht->begin();
}
// what do to during setup
// what to do during setup
void SensorDHT::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorDHT::onLoop() {
// temperature sensor
if (_sensor_type == SensorDHT::TEMPERATURE) {
......@@ -932,7 +1015,7 @@ void SensorDHT::onLoop() {
}
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorDHT::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -960,17 +1043,17 @@ SensorSHT21::SensorSHT21(int child_id, int sensor_type): Sensor(child_id,A2) {
}
}
// what do to during before
// what to do during before
void SensorSHT21::onBefore() {
// initialize the library
Wire.begin();
}
// what do to during setup
// what to do during setup
void SensorSHT21::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorSHT21::onLoop() {
// temperature sensor
if (_sensor_type == SensorSHT21::TEMPERATURE) {
......@@ -1003,7 +1086,7 @@ void SensorSHT21::onLoop() {
}
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorSHT21::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1045,18 +1128,18 @@ int SensorSwitch::getInitial() {
return _initial;
}
// what do to during before
// what to do during before
void SensorSwitch::onBefore() {
// initialize the value
if (_mode == RISING) _value_int = LOW;
else if (_mode == FALLING) _value_int = HIGH;
}
// what do to during setup
// what to do during setup
void SensorSwitch::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorSwitch::onLoop() {
// wait to ensure the the input is not floating
if (_debounce > 0) wait(_debounce);
......@@ -1080,7 +1163,7 @@ void SensorSwitch::onLoop() {
_value_int = -1;
}
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorSwitch::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1118,15 +1201,15 @@ SensorDs18b20::SensorDs18b20(int child_id, int pin, DallasTemperature* sensors,
_sensors->getAddress(_device_address, index);
}
// what do to during before
// what to do during before
void SensorDs18b20::onBefore() {
}
// what do to during setup
// what to do during setup
void SensorDs18b20::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorDs18b20::onLoop() {
// do not wait for conversion, will sleep manually during it
if (_sleep_during_conversion) _sensors->setWaitForConversion(false);
......@@ -1151,7 +1234,7 @@ void SensorDs18b20::onLoop() {
_value_float = temperature;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorDs18b20::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1189,16 +1272,16 @@ SensorBH1750::SensorBH1750(int child_id): Sensor(child_id,A4) {
_lightSensor = new BH1750();
}
// what do to during before
// what to do during before
void SensorBH1750::onBefore() {
_lightSensor->begin();
}
// what do to during setup
// what to do during setup
void SensorBH1750::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorBH1750::onLoop() {
// request the light level
_value_int = _lightSensor->readLightLevel();
......@@ -1210,7 +1293,7 @@ void SensorBH1750::onLoop() {
#endif
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorBH1750::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1230,17 +1313,17 @@ SensorMLX90614::SensorMLX90614(int child_id, Adafruit_MLX90614* mlx, int sensor_
setValueType(TYPE_FLOAT);
}
// what do to during before
// what to do during before
void SensorMLX90614::onBefore() {
// initialize the library
_mlx->begin();
}
// what do to during setup
// what to do during setup
void SensorMLX90614::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorMLX90614::onLoop() {
float temperature = _sensor_type == SensorMLX90614::TEMPERATURE_OBJECT ? _mlx->readAmbientTempC() : _mlx->readObjectTempC();
// convert it
......@@ -1254,7 +1337,7 @@ void SensorMLX90614::onLoop() {
if (! isnan(temperature)) _value_float = temperature;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorMLX90614::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1299,21 +1382,21 @@ void SensorBosch::setForecastSamplesCount(int value) {
_forecast_samples_count = value;
}
// what do to during before
// what to do during before
void SensorBosch::onBefore() {
// initialize the forecast samples array
_forecast_samples = new float[_forecast_samples_count];
}
// what do to during setup
// what to do during setup
void SensorBosch::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorBosch::onLoop() {
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorBosch::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1498,7 +1581,7 @@ SensorBMP085::SensorBMP085(int child_id, Adafruit_BMP085* bmp, int sensor_type):
_bmp = bmp;
}
// what do to during loop
// what to do during loop
void SensorBMP085::onLoop() {
// temperature sensor
if (_sensor_type == SensorBMP085::TEMPERATURE) {
......@@ -1560,11 +1643,11 @@ void SensorSonoff::setLedPin(int value) {
_led_pin = value;
}
// what do to during before
// what to do during before
void SensorSonoff::onBefore() {
}
// what do to during setup
// what to do during setup
void SensorSonoff::onSetup() {
// Setup the button
pinMode(_button_pin, INPUT_PULLUP);
......@@ -1580,7 +1663,7 @@ void SensorSonoff::onSetup() {
_blink();
}
// what do to during loop
// what to do during loop
void SensorSonoff::onLoop() {
// set the value to -1 so to avoid reporting to the gateway during loop
_value_int = -1;
......@@ -1594,7 +1677,7 @@ void SensorSonoff::onLoop() {
_old_value = value;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorSonoff::onReceive(const MyMessage & message) {
if (message.getCommand() == C_SET) {
// retrieve from the message the value to set
......@@ -1652,7 +1735,7 @@ SensorHCSR04::SensorHCSR04(int child_id, int pin): Sensor(child_id, pin) {
_echo_pin = pin;
}
// what do to during before
// what to do during before
void SensorHCSR04::onBefore() {
// initialize the library
_sonar = new NewPing(_trigger_pin,_echo_pin,_max_distance);
......@@ -1669,11 +1752,11 @@ void SensorHCSR04::setMaxDistance(int value) {
_max_distance = value;
}
// what do to during setup
// what to do during setup
void SensorHCSR04::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorHCSR04::onLoop() {
int distance = getControllerConfig().isMetric ? _sonar->ping_cm() : _sonar->ping_in();
#if DEBUG == 1
......@@ -1685,7 +1768,7 @@ void SensorHCSR04::onLoop() {
_value_int = distance;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorHCSR04::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1703,15 +1786,15 @@ SensorMCP9808::SensorMCP9808(int child_id, Adafruit_MCP9808* mcp): Sensor(child_
setValueType(TYPE_FLOAT);
}
// what do to during before
// what to do during before
void SensorMCP9808::onBefore() {
}
// what do to during setup
// what to do during setup
void SensorMCP9808::onSetup() {
}
// what do to during loop
// what to do during loop
void SensorMCP9808::onLoop() {
float temperature = _mcp->readTempC();
// convert it
......@@ -1726,7 +1809,7 @@ void SensorMCP9808::onLoop() {
if (! isnan(temperature)) _value_float = temperature;
}
// what do to as the main task when receiving a message
// what to do as the main task when receiving a message
void SensorMCP9808::onReceive(const MyMessage & message) {
if (message.getCommand() == C_REQ) onLoop();
}
......@@ -1836,6 +1919,7 @@ int NodeManager::registerSensor(int sensor_type, int pin, int child_id) {
else if (sensor_type == SENSOR_MQ) return registerSensor(new SensorMQ(child_id, pin));
else if (sensor_type == SENSOR_ML8511) return registerSensor(new SensorML8511(child_id, pin));
else if (sensor_type == SENSOR_ACS712) return registerSensor(new SensorACS712(child_id, pin));
else if (sensor_type == SENSOR_RAIN_GAUGE) return registerSensor(new SensorRainGauge(child_id, pin));
#endif
#if MODULE_DIGITAL_INPUT == 1
else if (sensor_type == SENSOR_DIGITAL_INPUT) return registerSensor(new SensorDigitalInput(child_id, pin));
......
NodeManager.h
View file @ 126812a9
/*
* NodeManager
*/
#ifndef NodeManager_h
#define NodeManager_h
#include <Arduino.h>
// define NodeManager version
#define VERSION "1.5-dev4"
#define VERSION "1.5-dev5"
/***********************************
Constants
......@@ -166,6 +165,8 @@
#define SENSOR_ML8511 20
// Current sensor
#define SENSOR_ACS712 24
// rain gauge sensor
#define SENSOR_RAIN_GAUGE 26
#endif
#if MODULE_DIGITAL_INPUT == 1
// Generic digital sensor, return a pin's digital value
......@@ -229,7 +230,7 @@
// MCP9808 sensor, precision temperature sensor
#define SENSOR_MCP9808 25
#endif
// last Id: 25
// last Id: 26
/***********************************
Libraries
*/
......@@ -566,7 +567,32 @@ class SensorACS712: public Sensor {
int _ACS_offset = 2500;
int _mv_per_amp = 185;
};
/*
SensorRainGauge
*/
class SensorRainGauge: public Sensor {
public:
SensorRainGauge(int child_id, int pin);
// set how frequently to report back to the controller in minutes. After reporting the measure is resetted (default: 60);
void setReportInterval(int value);
// set how many mm of rain to count for each tip (default: 0.11);
void setSingleTip(float value);
// define what to do at each stage of the sketch
void onBefore();
void onSetup();
void onLoop();