diff --git a/appliance_setup/appliance_setup.py b/appliance_setup/appliance_setup.py
index 8915d9798e3f88576a1e6e29ce89748025bad3c8..a22441e7844870cb8a7cbf87df9d6569c2a2b2ab 100755
--- a/appliance_setup/appliance_setup.py
+++ b/appliance_setup/appliance_setup.py
@@ -32,7 +32,6 @@ from user_interface import *
from helpers import *
from configuration import *
-#use Data::Dumper;
VERSION=0.01;
print """\
appliance_setup.py - version %.2f
@@ -42,11 +41,6 @@ License: GPL v2 or later
""" % (VERSION);
-
-# The PC always identifies itself as XXXXXXXX.
-#our $thisboxname = "XXXXXXXX";
-
-
def ask_device (ui):
devices = [];
for f in device_factories:
@@ -74,7 +68,7 @@ def ask_device (ui):
###############################################################################
-## INFRASTRUCTURE WIRELESS SETUP (i.e. wlan through access point / router)
+## WIRELESS SETUP (i.e. wlan through access point or ad-hoc)
###############################################################################
@@ -86,85 +80,6 @@ def wifi_ask_ssid (ui, dev):
if res:
return (res, aps)
-"""
-
-sub wifi_ask_security ($$) {
- my $ap = shift;
- my $aps = shift;
- my %result = ();
- my $sec = 0;
- if (defined $aps->{$ap}) {
- $sec = $aps->{$ap}->{'secmode'};
- $result{'channel'} = $aps->{$ap}->{'channel'};
- }
- $sec = ask_choice ("Security: ", ["None", -1, "WEP", "WPA-PSK", "WPA2-PSK", "WPA/WPA2-PSK"], ['0', '1', '2', '4', '6'], $sec);
- $result{'secmode'} = $sec;
-
- if ($sec == 0) {
- # No encryption, nothing to ask the user
- } elsif ($sec == 1) {
- # WEP
- progress "Using WEP security\n";
- $result{'authen'} = ask_choice ("Type of authentication:", ["Open System","Shared Key"], ['1','2'], '1');
- $result{'key'} = ask_wep_key ($ap);
- $result{'key_len'} = length ($result{'key'})/2;
- } elsif ($sec == 2 || $sec == 4 || $sec == 6 || $sec == 7) {
- # WPA1 / WPA2
- progress "Using %s security\n", security2string($sec);
- $result{'pskalset'} = ask_choice ("Type of encryption:", ["TKIP", "AES"], ['0','1'], '0');
- $result{'pskkey'} = ask_input ("Please enter the WPA passphrase for network '$ap': ",
- \&is_wpa_passphrase, "\tEnter a passprase with 1-63 characters!\n");
- } else {
- printf "ERROR: security type %s not supported\n", security2string($sec);
- return wifi_ask_security ($ap, $aps);
- }
- return %result;
-}
-
-sub wifi_config_create ($) {
- my $newconfig = shift;
- my $config = [
- ("4000", "IP_ADDR", $newconfig->{'ip_addr'}), # IP-address
- ("4001", "GATEWAY", $newconfig->{'gateway'}),
- ("4002", "MASK ", $newconfig->{'mask'}),
- ("4020", "DHCP_MODE", $newconfig->{'dhcp'}),
- ("4021", "", $newconfig->{'dhcp'}), # Unknown, == 4020
- ("4022", "", $newconfig->{'dhcp'}), # Unknown, == 4020
- ("5000", "", ""), # Unknown, always empty
- ("5003", "", ""), # Unknown, always empty
- ("5101", "", ""), # Unknown, always empty
- ("5102", "", ""), # Unknown, always empty
- ("5104", "", ""), # Unknown, always empty
- ("5103", "", ""), # Unknown, always empty
- ("7000", "SSID", $newconfig->{'SSID'}),
- ("7001", "DOMAIN", ""),
- ("7002", "CHANNEL", $newconfig->{'channel'}),
- ("7003", "SECMODE", $newconfig->{'secmode'}),
- ("7004", "KEY_LEN", $newconfig->{'key_len'}),
- ("7005", "DEFAULTKEY","0"),
- ("7006", "KEY0", $newconfig->{'key'}),
- ("7007", "KEY1", ""),
- ("7008", "KEY2", ""),
- ("7009", "KEY3", ""),
- ("7012", "AUTHEN", $newconfig->{'authen'}),
- ("7013", "MODE", "0"),
- ("7018", "PSKALSET", $newconfig->{'pskalset'}),
- ("7019", "PSKKEY", $newconfig->{'pskkey'}),
- ("7024", "STAMODE", "0"),
- ("7025", "APCHANNEL", "5"),
- ("7026", "CHMODE", "1"),
- ("7030", "WLMODE", "0"),
- ];
- return config_create ($config);
-}
-
-"""
-
-###############################################################################
-## AD-HOC WIRELESS SETUP (i.e. direct connection with print server and PC)
-###############################################################################
-
-
def adhoc_ask_ssid (ui, dev):
ssid = ""
@@ -179,42 +94,17 @@ def adhoc_ask_ssid (ui, dev):
else:
return ssid
-"""
-def adhoc_ask_channel (ap):
- channel = False
- while (!channel):
- c = input ("Wireless channel for network '%s' [auto or 0-13]: " % ap);
+def adhoc_ask_channel (ui, ssid):
+ channel = None
+ while (not channel):
+ c = ui.input ("Wireless channel for network '%s' [auto or 0-13]: " % ssid)
if (c == "auto"):
channel = "6" # FIXME
elif (re.match ('^([0-9]|1[0-3])$', c)):
channel = c
- debug ("\tNew channel: %s\n" % channel)
+ ui.debug ("\tNew channel: %s\n" % channel)
return channel
-sub adhoc_config_create ($) {
- my $newconfig = shift;
- my $config = [
- ["7024", "STAMODE", "1"],
- ["7025", "APCHANNEL", $newconfig->{'channel'}],
- ["7026", "CHMODE", "1"], # FIXME: Shall we change this?
- ["7030", "WLMODE", "1"], # FIXME: Shall we change this?
- ["7100", "APSSID", $newconfig->{'SSID'}],
- ["7103", "APSECMODE", $newconfig->{'secmode'}],
- ["7104", "APKEY_LEN", $newconfig->{'key_len'}],
- ["7105", "APDEFAULTKE","0"],
- ["7106", "APKEY0", $newconfig->{'key'}],
- ["7107", "APKEY1", ""],
- ["7108", "APKEY2", ""],
- ["7109", "APKEY3", ""],
- ["7112", "APAUTHEN", $newconfig->{'authen'}],
- ["7118", "APPSKALSET", $newconfig->{'pskalset'}],
- ["7119", "APPSKKEY", $newconfig->{'pskkey'}]
- ];
- return config_create ($config);
-}
-
-"""
-
###############################################################################
## MAIN OPERATIONS: ASK FOR OPERATION AND HANDLE IT
###############################################################################
@@ -269,30 +159,26 @@ def main ():
UI.debug ("\tSelected operation: %s\n" % operation)
if (operation == "wifi_infrastructure"):
## Infrastructure, scan for APs
- (newap, aps) = wifi_ask_ssid (UI, dev)
- newconfig = {'SSID': newap)
- UI.debug ("\tSelected wireless network: %s" % newap)
- security = UI.wifi_ask_security ()#TODO: $newap, $aps);
+ (ssid, aps) = wifi_ask_ssid (UI, dev)
+ newconfig = {'SSID': ssid, 'wifi-type': 'infrastructure'}
+ UI.debug ("\tSelected wireless network: %s" % ssid)
+ security = UI.wifi_ask_security (ssid, aps.get (ssid))
newconfig.update (security)
if (dev.capabilities['ip-address']):
ip = UI.ask_IP_setting ()
newconfig.update (ip)
- # TODO:
- #my $newcfg = wifi_config_create (\%newconfig);
- #device_config_send ($dev, $newcfg);
+ newcfg = dev.config_create (newconfig)
+ dev.config_send (newcfg)
reconfigured = True
elif (operation == "wifi_adhoc"):
## Ad-hoc connection to print server
- # TODO
- adhocssid = adhoc_ask_ssid (UI, dev)
+ ssid = adhoc_ask_ssid (UI, dev)
dev.command_send ("9971:\n")
- #my $channel = adhoc_ask_channel ($dev, $adhocssid);
- #my %newconfig = ('SSID' => $adhocssid,
- #'channel' => $channel,
- #adhoc_ask_security ($adhocssid)
- #);
- #my $newcfg = adhoc_config_create (\%newconfig);
- #device_config_send ($dev, $newcfg);
+ channel = adhoc_ask_channel (UI, ssid)
+ newconfig = {'SSID': ssid, 'channel': channel, 'wifi-type': 'ad-hoc'}
+ newconfig.update (UI.wifi_ask_security (ssid, None));
+ newcfg = dev.config_create (newconfig)
+ dev.config_send (newcfg)
reconfigured = True
elif (operation == "change_hostname"):
hostname = UI.ask_input ("New hostname: ", is_hostname,
diff --git a/appliance_setup/configuration.py b/appliance_setup/configuration.py
index 6505a995f13e3871d693b3b16d34deebde22dcda..401ff88f3b987d339f2b906bbbb68b8eaa6450e8 100644
--- a/appliance_setup/configuration.py
+++ b/appliance_setup/configuration.py
@@ -32,6 +32,8 @@ class Config:
def set_config (self, cfg):
self.cfgdata = cfg
+ def add_config (self, cfg):
+ self.cfgdata.extend (cfg)
def print_configuration (self, text):
res = text + "\tDevice name:\t%s\n" % self.val('0001')
@@ -41,12 +43,12 @@ class Config:
sec = self.val('7103');
res += "\tWireless mode:\tAd-hoc network\n"
res += "\tSSID:\t\t%s\n" % self.val('7100')
- res += "\tChannel:\t%s\n" % self.val('7102')
+ res += "\tChannel:\t%s\n" % self.val('7025')
res += "\tSecurity:\t%s\n" % security2string (sec)
- if (sec == 0):
+ if (sec == '0'):
# None => nothing to display
pass
- elif (sec == 1):
+ elif (sec == '1'):
# WEP => Print passphrase
res += "\tWEP Key:\t%s\n" % self.val('7106')
else:
@@ -59,10 +61,10 @@ class Config:
res += "\tSSID:\t\t%s\n" % self.val('7000')
res += "\tChannel:\t%s\n" % self.val('7002')
res += "\tSecurity:\t%s\n" % security2string (sec)
- if (sec == 0):
+ if (sec == '0'):
# None => nothing to display
pass
- elif (sec == 1):
+ elif (sec == '1'):
# WEP => Print passphrase
res += "\tAuthentication:\t%s\n" % authentication2string(self.val('7012'))
res += "\tWEP Key:\t%s\n" % self.val('7006')
@@ -105,12 +107,12 @@ class Config:
else:
print "Config line not in correct format:\n\t%s" % l
- def to_string (self, cfg=None):
+ def to_string (self, cfg=None, verbose=True):
res = ""
if (not cfg):
cfg = self.cfgdata
for (l, key, value) in cfg:
- res += "%s %s:%s\n" % (l, key, value)
+ res += "%s %s:%s\n" % (l, key if verbose else "", value)
return res
def save (self, filename):
@@ -137,80 +139,3 @@ class Config:
def remove_readonly (self):
self.cfgdata = filter (lambda d: d[0] not in self.readonly, self.cfgdata)
-
-
-
-"""
-
-
-###############################################################################
-## INFRASTRUCTURE WIRELESS SETUP (i.e. wlan through access point / router)
-###############################################################################
-
-
-sub wifi_config_create ($) {
- my $newconfig = shift;
- my $config = [
- ["4000", "IP_ADDR", $newconfig->{'ip_addr'}], # IP-address
- ["4001", "GATEWAY", $newconfig->{'gateway'}],
- ["4002", "MASK ", $newconfig->{'mask'}],
- ["4020", "DHCP_MODE", $newconfig->{'dhcp'}],
- ["4021", "", $newconfig->{'dhcp'}], # Unknown, == 4020
- ["4022", "", $newconfig->{'dhcp'}], # Unknown, == 4020
- ["5000", "", ""], # Unknown, always empty
- ["5003", "", ""], # Unknown, always empty
- ["5101", "", ""], # Unknown, always empty
- ["5102", "", ""], # Unknown, always empty
- ["5104", "", ""], # Unknown, always empty
- ["5103", "", ""], # Unknown, always empty
- ["7000", "SSID", $newconfig->{'SSID'}],
- ["7001", "DOMAIN", ""],
- ["7002", "CHANNEL", $newconfig->{'channel'}],
- ["7003", "SECMODE", $newconfig->{'secmode'}],
- ["7004", "KEY_LEN", $newconfig->{'key_len'}],
- ["7005", "DEFAULTKEY","0"],
- ["7006", "KEY0", $newconfig->{'key'}],
- ["7007", "KEY1", ""],
- ["7008", "KEY2", ""],
- ["7009", "KEY3", ""],
- ["7012", "AUTHEN", $newconfig->{'authen'}],
- ["7013", "MODE", "0"],
- ["7018", "PSKALSET", $newconfig->{'pskalset'}],
- ["7019", "PSKKEY", $newconfig->{'pskkey'}],
- ["7024", "STAMODE", "0"],
- ["7025", "APCHANNEL", "5"],
- ["7026", "CHMODE", "1"],
- ["7030", "WLMODE", "0"],
- ];
- return config_create ($config);
-}
-
-
-
-###############################################################################
-## AD-HOC WIRELESS SETUP (i.e. direct connection with print server and PC)
-###############################################################################
-
-sub adhoc_config_create ($) {
- my $newconfig = shift;
- my $config = [
- ["7024", "STAMODE", "1"],
- ["7025", "APCHANNEL", $newconfig->{'channel'}],
- ["7026", "CHMODE", "1"], # FIXME: Shall we change this?
- ["7030", "WLMODE", "1"], # FIXME: Shall we change this?
- ["7100", "APSSID", $newconfig->{'SSID'}],
- ["7103", "APSECMODE", $newconfig->{'secmode'}],
- ["7104", "APKEY_LEN", $newconfig->{'key_len'}],
- ["7105", "APDEFAULTKE","0"],
- ["7106", "APKEY0", $newconfig->{'key'}],
- ["7107", "APKEY1", ""],
- ["7108", "APKEY2", ""],
- ["7109", "APKEY3", ""],
- ["7112", "APAUTHEN", $newconfig->{'authen'}],
- ["7118", "APPSKALSET", $newconfig->{'pskalset'}],
- ["7119", "APPSKKEY", $newconfig->{'pskkey'}]
- ];
- return config_create ($config);
-}
-
-"""
\ No newline at end of file
diff --git a/appliance_setup/device_types.py b/appliance_setup/device_types.py
index 91051bdcf9e3e7cfe6d5fc1586a78a0b1293b1ec..7045a7cf66f24d467f7b7e5dba3d7448482fac8c 100755
--- a/appliance_setup/device_types.py
+++ b/appliance_setup/device_types.py
@@ -32,9 +32,6 @@ class Device:
def device_string (self):
pass
- def detect_devices (self):
- pass
-
def device_open (self):
pass
def device_close (self):
@@ -88,11 +85,81 @@ class Device:
pass
def error (self, msg):
self.ui.error (msg)
+
def set_hostname (self, hostname):
+ hostname = hostname[:19]
config = Config (self.ui, cfg=[('0001', 'BOX_NAME', hostname)]);
self.ui.debug ("\tChanging hostname using config\n\t%s\n" % config.to_string ())
return self.config_send (config)
+ def config_create (self, newconfig):
+ cfg = Config (self.ui)
+ adhoc = (newconfig.get ('wifi-type') == "ad-hoc")
+
+ if (self.capabilities['ip-address'] and not adhoc):
+ cfg.add_config ([
+ ("4000", "IP_ADDR", newconfig.get ('ip_addr','')), # IP-address
+ ("4001", "GATEWAY", newconfig.get ('gateway','')),
+ ("4002", "MASK ", newconfig.get ('mask','')),
+ ("4020", "DHCP_MODE", newconfig.get ('dhcp','')),
+ ("4021", "", newconfig.get ('dhcp','')), # Unknown, == 4020
+ ("4022", "", newconfig.get ('dhcp','')), # Unknown, == 4020
+ ])
+
+ ## Clear all SMB settings:
+ cfg.add_config ([
+ ("5000", "", ""), # Unknown, always empty
+ ("5003", "", ""), # Unknown, always empty
+ ("5101", "", ""), # Unknown, always empty
+ ("5102", "", ""), # Unknown, always empty
+ ("5104", "", ""), # Unknown, always empty
+ ("5103", "", ""), # Unknown, always empty
+ ])
+
+ if (not adhoc):
+ cfg.add_config ([
+ ("7000", "SSID", newconfig.get ('SSID','')),
+ ("7001", "DOMAIN", ""),
+ ("7002", "CHANNEL", newconfig.get ('channel','')),
+ ("7003", "SECMODE", newconfig.get ('secmode','')),
+ ("7004", "KEY_LEN", newconfig.get ('key_len','')),
+ ("7005", "DEFAULTKEY","0"),
+ ("7006", "KEY0", newconfig.get ('key','')),
+ ("7007", "KEY1", ""),
+ ("7008", "KEY2", ""),
+ ("7009", "KEY3", ""),
+ ("7012", "AUTHEN", newconfig.get ('authen','')),
+ ("7013", "MODE", "0"),
+ ("7018", "PSKALSET", newconfig.get ('pskalset','')),
+ ("7019", "PSKKEY", newconfig.get ('pskkey','')),
+ ("7024", "STAMODE", "0"),
+ ("7025", "APCHANNEL", "5"),
+ ("7026", "CHMODE", "1"),
+ ("7030", "WLMODE", "0"),
+ ])
+ else:
+ cfg.add_config ([
+ ("7024", "STAMODE", "1"),
+ ("7025", "APCHANNEL", newconfig.get ('channel','')),
+ ("7026", "CHMODE", "1"), # FIXME: Shall we change this?
+ ("7030", "WLMODE", "1"), # FIXME: Shall we change this?
+ ("7100", "APSSID", newconfig.get ('SSID','')),
+ ("7103", "APSECMODE", newconfig.get ('secmode','')),
+ ("7104", "APKEY_LEN", newconfig.get ('key_len','')),
+ ("7105", "APDEFAULTKE","0"),
+ ("7106", "APKEY0", newconfig.get ('key','')),
+ ("7107", "APKEY1", ""),
+ ("7108", "APKEY2", ""),
+ ("7109", "APKEY3", ""),
+ ("7112", "APAUTHEN", newconfig.get ('authen','')),
+ ("7118", "APPSKALSET", newconfig.get ('pskalset','')),
+ ("7119", "APPSKKEY", newconfig.get ('pskkey',''))
+ ])
+ #print cfg
+ #print cfg.to_string (verbose=False)
+ return cfg
+
+
class USBDeviceFactory (DeviceFactory):
supported_devices = (
@@ -170,7 +237,8 @@ class USBDevice (Device):
def device_reset (self):
self.ui.progress ("Resetting the device, please wait")
res = self.command_send ("9002:\n")
- self.ui.debug ("\tSent 9002 reset command: %s (len: %s)" % (res, len(res)))
+ if res:
+ self.ui.debug ("\tSent 9002 reset command: %s (len: %s)" % (res, len(res)))
# Poll the device until it doesn't respond. Then sleep for ~15 seconds
try:
i=0
@@ -288,8 +356,8 @@ class Ether8888Packet:
class Ether8888DeviceFactory (DeviceFactory):
supported_devices = (
- {'id': '\x04\xE0\x54\x00', 'desc':"Vonets VAP11G wireless bridge"},
- #{'id': '\x59\x4a\x34\x8c', 'desc':"HP2101nw Wireless USB print server (via WLAN)"},
+ {'id': '\x04\xE0\x54\x00', 'desc':"Vonets VAP11G wireless bridge", 'supported': True},
+ {'id': '\x59\x4a\x34\x8c', 'desc':"HP2101nw Wireless USB print server (via WLAN)", 'supported': False},
);
proto=0x8888;
def __init__ (self):
@@ -298,7 +366,8 @@ class Ether8888DeviceFactory (DeviceFactory):
def list_supported (self):
devices = [];
for d in self.supported_devices:
- devices.append ("%(desc)s, Ethernet, type 0x%(proto)04x" % dict({'proto': self.proto}, **d));
+ if d.get('supported'):
+ devices.append ("%(desc)s, Ethernet, type 0x%(proto)04x" % dict({'proto': self.proto}, **d));
return devices;
def detect (self, ui):
@@ -335,16 +404,17 @@ class Ether8888DeviceFactory (DeviceFactory):
if (not pack.decode (rxFrame)):
ui.error ("decoding response packet of device detection")
continue
- is_broadcast = (pack.srcAddr == bcAddr) and (pack.dstAddr == bcAddr)
+ is_broadcast = (pack.srcAddr == bcAddr) or (pack.dstAddr == bcAddr)
if is_broadcast:
ui.debug ("Received broadcast package instead of response:")
ui.hex_print (rxFrame)
continue
ifName,ifProto,pktType,hwType,hwAddr = sock.getsockname()
devdesc = None
+ dev = None
for d in self.supported_devices:
if d['id'] == pack.data[2:6]:
- devdesc = d['desc']
+ dev = d
break
else:
ui.hex_print (pack.srcAddr)
@@ -352,7 +422,10 @@ class Ether8888DeviceFactory (DeviceFactory):
continue
ui.debug ("Received response packet:")
ui.hex_print (rxFrame)
- devices.append (Ether8888Device (ui, ifName, ifProto, pack.srcAddr, devdesc, localAddr = pack.dstAddr));
+ if dev.get ('supported'):
+ devices.append (Ether8888Device (ui, ifName, ifProto, pack.srcAddr, dev.get('desc', "Unknown device"), localAddr = pack.dstAddr))
+ else:
+ ui.progress ("Device {} (MAC {}, interface {}) not supported, ignoring response".format (dev.get('desc'), formatMAC (pack.srcAddr), ifName))
for s in sockets:
s.close ();
@@ -486,7 +559,6 @@ class Ether8888Device (Device):
time.sleep (1)
return self.raw_read (length, timeout)
-
def command_send (self, cfg):
res = self.data_write (cfg, len(cfg), cmd=self.cmds.get('send_data'), unknown="\1\0")
return self.data_read (25600)
diff --git a/appliance_setup/user_interface.py b/appliance_setup/user_interface.py
index 71fce11894bc5ba48dc07f4251a4806b68747d9e..76fc90300fe22e5b528e49ebb81e6c3aafe9b2d5 100755
--- a/appliance_setup/user_interface.py
+++ b/appliance_setup/user_interface.py
@@ -55,14 +55,14 @@ class UserInterface:
def ask_IP_setting (self):
dhcp = self.ask_choice ("IP-address assignment:", ["DHCP", "Manual"], ["Enable", "Disable"], "Enable");
result = {"dhcp": dhcp}
- if (dhcp == "Enable");
- result['ip_addr'] = self.ask_ip_address ("IP-address of the device:")
- result['mask'] = self.ask_ip_address ("Netmask:")
- result['gateway'] = self.ask_ip_address ("IP-address of the gateway:")
- else:
+ if (dhcp == "Enable"):
result['ip_addr'] = "0.0.0.0"
result['mask'] = "0.0.0.0"
result['gateway'] = "0.0.0.0"
+ else:
+ result['ip_addr'] = self.ask_ip_address ("\tIP-address of the device:\t")
+ result['mask'] = self.ask_ip_address ("\tNetmask:\t\t\t")
+ result['gateway'] = self.ask_ip_address ("\tIP-address of the gateway:\t")
return result
def ask_operation (self):
@@ -75,6 +75,33 @@ class UserInterface:
pass
def wait_enter (self, text):
pass
+ # Request the type of security and if needed the required credentials
+ def wifi_ask_security (self,ssid, apsettings):
+ result = {}
+ if apsettings:
+ result['channel'] = apsettings.get ('channel')
+ result['secmode'] = apsettings.get ('secmode')
+ result['secmode'] = self.ask_choice ("Security: ", ["None", -1, "WEP", "WPA-PSK", "WPA2-PSK", "WPA/WPA2-PSK"], ['0', '1', '2', '4', '6'], result.get ('secmode'))
+
+ if (result['secmode'] == '0'):
+ pass
+ elif (result['secmode'] == '1'):
+ # WEP
+ self.progress ("Using WEP security")
+ result['authen'] = self.ask_choice ("Type of authentication:", ["Open System","Shared Key"], ['1','2'], '1')
+ result['key'] = self.ask_wep_key (ssid)
+ result['key_len'] = len (result['key'])/2
+ elif (result['secmode'] in ['2','4','6','7']):
+ # WPA1 / WPA2
+ self.progress ("Using %s security" % security2string(result['secmode']))
+ result['pskalset'] = self.ask_choice ("Type of encryption:", ["TKIP", "AES"], ['0','1'], '0')
+ result['pskkey'] = self.ask_input ("Please enter the WPA passphrase for network '%s': " % ssid,
+ is_wpa_passphrase, "\tEnter a passprase with 1-63 characters!")
+ else:
+ self.error ("security type %s not supported" % security2string(result['secmode']))
+ return self.wifi_ask_security (ssid, apsettings)
+ return result
+
class ConsoleInterface (UserInterface):
def __init__ (self, debug):
@@ -174,12 +201,12 @@ class ConsoleInterface (UserInterface):
pass
def ask_ip_address (self, string):
- return self.ask_input (string, self.is_ip_address, "\tInvalid input %s. Please enter a string of the form xxx.xxx.xxx.xxx, where each xxx is a number from 0 to 255.\n")
+ return self.ask_input (string, is_ip_address, "\tInvalid input %s. Please enter a string of the form xxx.xxx.xxx.xxx, where each xxx is a number from 0 to 255.\n")
def ask_wep_key (self, ap):
return self.ask_input (
"Please enter the WEP key (10 or 26 characters, 0-9 and a-f) for network '%s': " % ap,
- helpers.is_wep_key,
+ is_wep_key,
"\tInvalid key %s. Length can only be 10 or 26, use only digits 0-9 and letters a-f.\n\n")
def wait_enter (self, text):
@@ -230,7 +257,7 @@ class ConsoleInterface (UserInterface):
try:
i = int(newssid)
print "int %s = %d" % (newssid,i)
- if (i>0 and i<len(ssids)):
+ if (i>0 and i<=len(ssids)):
print "In range"
return ssids[i-1]
else: