Skip to content

GitLab

Commit cec50cca authored by user2684's avatar user2684
Browse files

Use software reboot instead of reboot pin #101

parent 126812a9
Show whitespace changes
Inline Side-by-side
NodeManager.cpp
View file @ cec50cca
......@@ -616,27 +616,29 @@ void SensorRainGauge::onSetup() {
// what to do when when receiving an interrupt
void SensorRainGauge::_onTipped() {
long now = millis();
// on tipping, two consecutive interrupts are received, ignore the second one
if (millis() - _last_tip > 100){
if ( (now - _last_tip > 100) || (now < _last_tip) ){
// increase the counter
_count++;
#if DEBUG == 1
Serial.println(F("RAIN+"));
#endif
}
_last_tip = millis();
_last_tip = now;
}
// what to do during loop
void SensorRainGauge::onLoop() {
// avoid reporting the same value multiple times
_value_float = -1;
long now = millis();
// time elapsed since the last report
long elapsed = millis() - _last_report;
long elapsed = now - _last_report;
// minimum time interval between reports
long min_interval = ((long)_report_interval*1000)*60;
// time to report
if (elapsed > min_interval) {
// time to report or millis() reset
if ( (elapsed > min_interval) || (now < _last_report)) {
// report the total amount of rain for the last period
_value_float = _count*_single_tip;
#if DEBUG == 1
......@@ -647,7 +649,7 @@ void SensorRainGauge::onLoop() {
#endif
// reset the counters
_count = 0;
_last_report = millis();
_last_report = now;
}
}
......@@ -876,6 +878,9 @@ void SensorDigitalOutput::setPulseWidth(int value) {
void SensorDigitalOutput::setOnValue(int value) {
_on_value = value;
}
void SensorDigitalOutput::setLegacyMode(bool value) {
_legacy_mode = value;
}
// main task
void SensorDigitalOutput::onLoop() {
......@@ -884,7 +889,8 @@ void SensorDigitalOutput::onLoop() {
// what to do as the main task when receiving a message
void SensorDigitalOutput::onReceive(const MyMessage & message) {
if (message.getCommand() == C_SET) {
// by default handle a SET message but when legacy mode is set when a REQ message is expected instead
if ( (message.getCommand() == C_SET && ! _legacy_mode) || (message.getCommand() == C_REQ && _legacy_mode)) {
// retrieve from the message the value to set
int value = message.getInt();
if (value != 0 && value != 1) return;
......@@ -915,7 +921,7 @@ void SensorDigitalOutput::onReceive(const MyMessage & message) {
_state = value;
_value_int = value;
}
if (message.getCommand() == C_REQ) {
if (message.getCommand() == C_REQ && ! _legacy_mode) {
// return the current status
_value_int = _state;
}
......@@ -1826,9 +1832,6 @@ NodeManager::NodeManager() {
}
// setter/getter
void NodeManager::setRebootPin(int value) {
_reboot_pin = value;
}
void NodeManager::setRetries(int value) {
_retries = value;
}
......@@ -2132,15 +2135,6 @@ void NodeManager::before() {
Serial.print(F("NodeManager v"));
Serial.println(VERSION);
#endif
if (_reboot_pin > -1) {
#if DEBUG == 1
Serial.print(F("REB P="));
Serial.println(_reboot_pin);
#endif
// setup the reboot pin
pinMode(_reboot_pin, OUTPUT);
digitalWrite(_reboot_pin, HIGH);
}
// setup the sleep interrupt pin
if (_sleep_interrupt_pin > -1) {
// set the interrupt when the pin is connected to ground
......@@ -2388,15 +2382,22 @@ void NodeManager::_process(const char * message) {
sendBatteryLevel(percentage,_ack);
}
#endif
#ifndef MY_GATEWAY_ESP8266
// REBOOT: reboot the board
else if (strcmp(message, "REBOOT") == 0 && _reboot_pin > -1) {
else if (strcmp(message, "REBOOT") == 0) {
#if DEBUG == 1
Serial.println(F("REBOOT"));
#endif
// set the reboot pin connected to RST to low so to reboot the board
_send(_msg.set(message));
digitalWrite(_reboot_pin, LOW);
// Software reboot with watchdog timer. Enter Watchdog Configuration mode:
WDTCSR |= (1<<WDCE) | (1<<WDE);
// Reset enable
WDTCSR= (1<<WDE);
// Infinite loop until watchdog reset after 16 ms
while(true){}
}
#endif
// CLEAR: clear the user's eeprom
else if (strcmp(message, "CLEAR") == 0) {
#if DEBUG == 1
......@@ -2425,12 +2426,10 @@ void NodeManager::_process(const char * message) {
#endif
#ifndef MY_GATEWAY_ESP8266
// Save static ID to eeprom
hwWriteConfig(EEPROM_NODE_ID_ADDRESS, (uint8_t)node_id);
//hwWriteConfig(EEPROM_NODE_ID_ADDRESS, (uint8_t)node_id);
#endif
// reboot the board
#if REBOOT_PIN == 1
_process(REBOOT);
#endif
_process("REBOOT");
}
// MODEx: change the way the node behaves. 0: stay awake withtout executing each sensors' loop(), 1: go to sleep for the configured interval, 2: wait for the configured interval, 3: stay awake and execute each sensors' loop() (e.g. MODE1)
else if (strlen(message) == 5 && strncmp("MODE", message, strlen("MODE")) == 0) {
......
NodeManager.h
View file @ cec50cca
......@@ -7,7 +7,7 @@
#include <Arduino.h>
// define NodeManager version
#define VERSION "1.5-dev5"
#define VERSION "1.5"
/***********************************
Constants
......@@ -245,10 +245,6 @@
// include MySensors libraries
#include <core/MySensorsCore.h>
#ifndef MY_GATEWAY_ESP8266
#include <core/MyHwAVR.h>
//#include <core/MyHwATMega328.h>
#endif
// include third party libraries
#if MODULE_DHT == 1
......@@ -589,7 +585,7 @@ class SensorRainGauge: public Sensor {
static long _last_tip;
static long _count;
protected:
int _report_interval = 4;
int _report_interval = 60;
float _single_tip = 0.11;
long _last_report = 0;
};
......@@ -619,6 +615,8 @@ class SensorDigitalOutput: public Sensor {
void setPulseWidth(int value);
// define which value to set to the output when set to on (default: HIGH)
void setOnValue(int value);
// when legacy mode is enabled expect a REQ message to trigger, otherwise the default SET (default: false)
void setLegacyMode(bool value);
// define what to do at each stage of the sketch
void onBefore();
void onSetup();
......@@ -629,6 +627,7 @@ class SensorDigitalOutput: public Sensor {
int _on_value = HIGH;
int _state = 0;
int _pulse_width = 0;
bool _legacy_mode = false;
};
......@@ -1058,7 +1057,6 @@ class NodeManager {
int _interrupt_1_pull = -1;
int _interrupt_2_pull = -1;
int _last_interrupt_pin = -1;
int _reboot_pin = -1;
long _timestamp = -1;
Sensor* _sensors[255] = {0};
bool _ack = false;
......
README.md
View file @ cec50cca
......@@ -197,8 +197,6 @@ MODULE_MCP9808 | https://github.com/adafruit/Adafruit_MCP9808_Library
Node Manager comes with a reasonable default configuration. If you want/need to change its settings, this can be done in your sketch, inside the `before()` function and just before registering your sensors. The following methods are exposed for your convenience:
~~~c
// the pin to connect to the RST pin to reboot the board (default: 4)
void setRebootPin(int value);
// send the same service message multiple times (default: 1)
void setRetries(int value);
#if BATTERY_MANAGER == 1
......@@ -449,6 +447,8 @@ Each sensor class can expose additional methods.
void setPulseWidth(int value);
// define which value to set to the output when set to on (default: HIGH)
void setOnValue(int value);
// when legacy mode is enabled expect a REQ message to trigger, otherwise the default SET (default: false)
void setLegacyMode(bool value);
~~~
#### SensorSwitch / SensorDoor / SensorMotion
......@@ -587,7 +587,6 @@ If `PERSIST` is enabled, the settings provided with `INTVLnnnX` and `MODEx` are
A NodeManager object must be created and called from within your sketch during `before()`, `presentation()`, `loop()` and `receive()` to work properly. NodeManager will do the following during each phase:
## NodeManager::before()
* Configure the reboot pin so to allow rebooting the board
* Setup the interrupt pins to wake up the board based on the configured interrupts (e.g. stop sleeping when the pin is connected to ground or wake up and notify when a motion sensor has trigger)
* If persistance is enabled, restore from the EEPROM the latest sleeping settings
* Call `before()` of each registered sensor
......@@ -624,12 +623,6 @@ A NodeManager object must be created and called from within your sketch during `
# Examples
All the examples below takes place within the before() function in the main sketch, just below the "Register below your sensors" comment.
Enable reboot pin, connect pin 4 to RST to enable rebooting the board with the REBOOT message:
~~~c
nodeManager.setRebootPin(4);
~~~
Set battery minimum and maxium voltage. This will be used to calculate the level percentage:
~~~c
......@@ -1076,11 +1069,14 @@ v1.5:
* Added support for HC-SR04 distance sensor
* Added support for BMP085/BMP180 temperature and pressure sensor
* Added support for Sonoff smart switch
* Added forecast output to BME280 sensor
* Added capability to retrieve the time from the controller
* Added support for Rain Gauge sensor
* Added support for MCP9808 temperature sensor
* Added forecast output to all Bosch sensors
* Added I2C address auto-discovery for all Bosch sensors
* Added support for running as a gateway
* A heartbeat is sent when waking up from a wait cycle
* Allowed combining sensors waking up from an interrupt and sensors reporting periodically
* Added capability to retrieve the time from the controller
* Optimized battery life for DS18B20 sensors
* SLEEP_MANAGER has been deprecated and setMode() replaces setSleepMode()
* New mode ALWAYS_ON to let the node staying awake and executing each sensors' loop
......
config.h
View file @ cec50cca
......@@ -97,11 +97,10 @@
#define REMOTE_CONFIGURATION 1
// if enabled, persist the remote configuration settings on EEPROM
#define PERSIST 0
// if enabled, send a SLEEPING and AWAKE service messages just before entering and just after leaving a sleep cycle and STARTED when starting/rebooting
#define SERVICE_MESSAGES 0
// if enabled, a battery sensor will be created at BATTERY_CHILD_ID and will report vcc voltage together with the battery level percentage
#define BATTERY_SENSOR 1
// if enabled, send a SLEEPING and AWAKE service messages just before entering and just after leaving a sleep cycle and STARTED when starting/rebooting
#define SERVICE_MESSAGES 0
// Enable this module to use one of the following sensors: SENSOR_ANALOG_INPUT, SENSOR_LDR, SENSOR_THERMISTOR, SENSOR_MQ, SENSOR_ML8511, SENSOR_ACS712, SENSOR_RAIN_GAUGE
#define MODULE_ANALOG_INPUT 1
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment