NodeManager.cpp 47.1 KB
Newer Older
DV's avatar
DV committed
1
2
3
4
5
6
7
8
9
10
11
12
/*
 * NodeManager
 */

#include "NodeManager.h"


/***************************************
   PowerManager
*/

// set the vcc and ground pin the sensor is connected to
13
void PowerManager::setPowerPins(int ground_pin, int vcc_pin, long wait) {
DV's avatar
DV committed
14
  #if DEBUG == 1
15
    Serial.print(F("PWR G="));
DV's avatar
DV committed
16
    Serial.print(ground_pin);
17
    Serial.print(F(" V="));
DV's avatar
DV committed
18
    Serial.println(vcc_pin);
DV's avatar
DV committed
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
  #endif
  // configure the vcc pin as output and initialize to low (power off)
  _vcc_pin = vcc_pin;
  pinMode(_vcc_pin, OUTPUT);
  digitalWrite(_vcc_pin, LOW);
  // configure the ground pin as output and initialize to low
  _ground_pin = ground_pin;
  pinMode(_ground_pin, OUTPUT);
  digitalWrite(_ground_pin, LOW);
  _wait = wait;
}

// return true if power pins have been configured
bool PowerManager::_hasPowerManager() {
  if (_vcc_pin != -1 && _ground_pin != -1) return true;
  return false;
}

// turn on the sensor by activating its power pins
void PowerManager::powerOn() {
  if (! _hasPowerManager()) return;
  #if DEBUG == 1
41
    Serial.print(F("ON P="));
DV's avatar
DV committed
42
43
44
45
46
    Serial.println(_vcc_pin);
  #endif
  // power on the sensor by turning high the vcc pin
  digitalWrite(_vcc_pin, HIGH);
  // wait a bit for the device to settle down
47
  if (_wait > 0) wait(_wait);
DV's avatar
DV committed
48
49
50
51
52
53
}

// turn off the sensor
void PowerManager::powerOff() {
  if (! _hasPowerManager()) return;
  #if DEBUG == 1
54
    Serial.print(F("OFF P="));
DV's avatar
DV committed
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
    Serial.println(_vcc_pin);
  #endif
  // power off the sensor by turning low the vcc pin
  digitalWrite(_vcc_pin, LOW);
}

/******************************************
    Sensors
*/

/*
   Sensor class
*/
// constructor
Sensor::Sensor(int child_id, int pin) {
  _child_id = child_id;
  _pin = pin;
  _msg = MyMessage(_child_id, _type);
}

// setter/getter
void Sensor::setPin(int value) {
  _pin = value;
}
int Sensor::getPin() {
  return _pin;
}
void Sensor::setChildId(int value) {
  _child_id = value;
}
int Sensor::getChildId() {
  return _child_id;
}
void Sensor::setPresentation(int value) {
  _presentation = value;
}
int Sensor::getPresentation() {
  return _presentation;
}
void Sensor::setType(int value) {
  _type = value;
  _msg.setType(_type);
}
int Sensor::getType() {
  return _type;
}
void Sensor::setRetries(int value) {
  _retries = value;
}
void Sensor::setSamples(int value) {
  _samples = value;
}
void Sensor::setSamplesInterval(int value) {
  _samples_interval = value;
}
void Sensor::setTackLastValue(bool value) {
  _track_last_value = value;
}
void Sensor::setForceUpdate(int value) {
  _force_update = value;
}
void Sensor::setValueType(int value) {
  _value_type = value;
}
void Sensor::setFloatPrecision(int value) {
  _float_precision = value;
}
#if POWER_MANAGER == 1
123
    void Sensor::setPowerPins(int ground_pin, int vcc_pin, long wait) {
DV's avatar
DV committed
124
125
      _powerManager.setPowerPins(ground_pin, vcc_pin, wait);
    }
DV's avatar
DV committed
126
127
128
    void Sensor::setAutoPowerPins(bool value) {
      _auto_power_pins = value;
    }
DV's avatar
DV committed
129
130
131
132
133
134
135
    void Sensor::powerOn() {
      _powerManager.powerOn();
    }
    void Sensor::powerOff() {
      _powerManager.powerOff();
    }
#endif
DV's avatar
DV committed
136
137
138
void Sensor::setSleepBetweenSend(int value) {
  _sleep_between_send = value;
}
DV's avatar
DV committed
139
140
141
142

// present the sensor to the gateway and controller
void Sensor::presentation() {
  #if DEBUG == 1
143
    Serial.print(F("PRES I="));
DV's avatar
DV committed
144
    Serial.print(_child_id);
145
    Serial.print(F(" T="));
DV's avatar
DV committed
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
    Serial.println(_presentation);
  #endif
  present(_child_id, _presentation);
}

// call the sensor-specific implementation of before
void Sensor::before() {
  if (_pin == -1) return;
  onBefore();
}

// call the sensor-specific implementation of loop
void Sensor::loop(const MyMessage & message) {
  if (_pin == -1) return;
  #if POWER_MANAGER == 1
    // turn the sensor on
DV's avatar
DV committed
162
    if (_auto_power_pins) powerOn();
DV's avatar
DV committed
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
  #endif
  // for numeric sensor requiring multiple samples, keep track of the total
  float total = 0;
  // keep track of the number of cycles since the last update
  _cycles++;
  // collect multiple samples if needed
  for (int i = 0; i < _samples; i++) {
    // call the sensor-specific implementation of the main task which will store the result in the _value variable
    if (message.sender == 0 && message.sensor == 0 && message.getCommand() == 0 && message.type == 0) {
      // empty message, we'be been called from loop()
      onLoop();
    }
    else {
      // we've been called from receive(), pass the message along
      onReceive(message);
    }
    // for integers and floats, keep track of the total
    if (_value_type == TYPE_INTEGER) total += (float)_value_int;
    else if (_value_type == TYPE_FLOAT) total += _value_float;
    // wait between samples
183
    if (_samples_interval > 0) wait(_samples_interval);
DV's avatar
DV committed
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
  }
  // process the result and send a response back. 
  if (_value_type == TYPE_INTEGER && total > -1) {
    // if the value is an integer, calculate the average value of the samples
    int avg = (int) (total / _samples);
    // if track last value is disabled or if enabled and the current value is different then the old value, send it back
    if (! _track_last_value || (_track_last_value && avg != _last_value_int) || (_track_last_value && _force_update > 0 && _cycles > _force_update)) {
      _cycles = 0;
      _last_value_int = avg;
      _send(_msg.set(avg));
    }
  }
  // process a float value
  else if (_value_type == TYPE_FLOAT && total > -1) {
    // calculate the average value of the samples
    float avg = total / _samples;
    // if track last value is disabled or if enabled and the current value is different then the old value, send it back
    if (! _track_last_value || (_track_last_value && avg != _last_value_float) || (_track_last_value && _cycles >= _force_update)) {
      _cycles = 0;
      _last_value_float = avg;
      _send(_msg.set(avg, _float_precision));
    }
  }
  // process a string value
  else if (_value_type == TYPE_STRING) {
    // if track last value is disabled or if enabled and the current value is different then the old value, send it back
    if (! _track_last_value || (_track_last_value && strcmp(_value_string, _last_value_string) != 0) || (_track_last_value && _cycles >= _force_update)) {
      _cycles = 0;
      _last_value_string = _value_string;
      _send(_msg.set(_value_string));
    }
  }
  // turn the sensor off
  #if POWER_MANAGER == 1
DV's avatar
DV committed
218
    if (_auto_power_pins) powerOff();
DV's avatar
DV committed
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
  #endif
}

// receive a message from the radio network
void Sensor::receive(const MyMessage &message) {
  // return if not for this sensor
  if (message.sensor != _child_id || message.type != _type) return;
  // a request would make the sensor executing its main task
  loop(message);
}

// send a message to the network
void Sensor::_send(MyMessage & message) {
  // send the message, multiple times if requested
  for (int i = 0; i < _retries; i++) {
DV's avatar
DV committed
234
    // if configured, sleep beetween each send
235
    if (_sleep_between_send > 0) wait(_sleep_between_send);
DV's avatar
DV committed
236
    #if DEBUG == 1
237
      Serial.print(F("SEND D="));
DV's avatar
DV committed
238
      Serial.print(message.destination);
239
      Serial.print(F(" I="));
DV's avatar
DV committed
240
      Serial.print(message.sensor);
241
      Serial.print(F(" C="));
DV's avatar
DV committed
242
      Serial.print(message.getCommand());
243
      Serial.print(F(" T="));
DV's avatar
DV committed
244
      Serial.print(message.type);
245
      Serial.print(F(" S="));
DV's avatar
DV committed
246
      Serial.print(message.getString());
247
      Serial.print(F(" N="));
DV's avatar
DV committed
248
      Serial.print(message.getInt());
249
      Serial.print(F(" F="));
DV's avatar
DV committed
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
      Serial.println(message.getFloat());
    #endif
    send(message);
  }
}

/*
   SensorAnalogInput
*/

// contructor
SensorAnalogInput::SensorAnalogInput(int child_id, int pin): Sensor(child_id, pin) {
}

// setter/getter
void SensorAnalogInput::setReference(int value) {
  _reference = value;
}
void SensorAnalogInput::setReverse(bool value) {
  _reverse = value;
}
void SensorAnalogInput::setOutputPercentage(bool value) {
  _output_percentage = value;
}
void SensorAnalogInput::setRangeMin(int value) {
  _range_min = value;
}
void SensorAnalogInput::setRangeMax(int value) {
  _range_max = value;
}

// what do to during setup
void SensorAnalogInput::onBefore() {
  // prepare the pin for input
  pinMode(_pin, INPUT);
}

// what do to during loop
void SensorAnalogInput::onLoop() {
  // read the input
  int adc = _getAnalogRead();
  // calculate the percentage
  int percentage = 0;
  if (_output_percentage) percentage = _getPercentage(adc);
  #if DEBUG == 1
295
    Serial.print(F("A-IN I="));
DV's avatar
DV committed
296
    Serial.print(_child_id);
297
    Serial.print(F(" V="));
DV's avatar
DV committed
298
    Serial.print(adc);
299
    Serial.print(F(" %="));
DV's avatar
DV committed
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
    Serial.println(percentage);
  #endif
  // store the result
  _value_int = _output_percentage ? percentage : adc;
}

// what do to during loop
void SensorAnalogInput::onReceive(const MyMessage & message) {
  onLoop();
}

// read the analog input
int SensorAnalogInput::_getAnalogRead() {
  // set the reference
  if (_reference != -1) {
    analogReference(_reference);
316
    wait(100);
DV's avatar
DV committed
317
318
319
320
321
322
323
324
325
326
  }
  // read and return the value
  int value = analogRead(_pin);
  if (_reverse) value = _range_max - value;
  return value;
}

// return a percentage from an analog value
int SensorAnalogInput::_getPercentage(int adc) {
  float value = (float)adc;
DV's avatar
DV committed
327
328
  // restore the original value
  if (_reverse) value = 1024 - value;
DV's avatar
DV committed
329
330
  // scale the percentage based on the range provided
  float percentage = ((value - _range_min) / (_range_max - _range_min)) * 100;
DV's avatar
DV committed
331
  if (_reverse) percentage = 100 - percentage;
DV's avatar
DV committed
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
  if (percentage > 100) percentage = 100;
  if (percentage < 0) percentage = 0;
  return (int)percentage;
}

/*
   SensorLDR
*/

// contructor
SensorLDR::SensorLDR(int child_id, int pin): SensorAnalogInput(child_id, pin) {
  // set presentation and type and reverse (0: no light, 100: max light)
  setPresentation(S_LIGHT_LEVEL);
  setType(V_LIGHT_LEVEL);
  setReverse(true);
}

/*
   SensorThermistor
*/

// contructor
SensorThermistor::SensorThermistor(int child_id, int pin): Sensor(child_id, pin) {
  // set presentation, type and value type
  setPresentation(S_TEMP);
  setType(V_TEMP);
  setValueType(TYPE_FLOAT);
}

// setter/getter
void SensorThermistor::setNominalResistor(int value) {
  _nominal_resistor = value;
}
void SensorThermistor::setNominalTemperature(int value) {
  _nominal_temperature = value;
}
void SensorThermistor::setBCoefficient(int value) {
  _b_coefficient = value;
}
void SensorThermistor::setSeriesResistor(int value) {
  _series_resistor = value;
}
void SensorThermistor::setOffset(float value) {
  _offset = value;
}

// what do to during setup
void SensorThermistor::onBefore() {
  // set the pin as input
  pinMode(_pin, INPUT);
}

// what do to during loop
void SensorThermistor::onLoop() {
  // read the voltage across the thermistor
  float adc = analogRead(_pin);
  // calculate the temperature
  float reading = (1023 / adc)  - 1;
  reading = _series_resistor / reading;
  float temperature;
  temperature = reading / _nominal_resistor;     // (R/Ro)
  temperature = log(temperature);                  // ln(R/Ro)
  temperature /= _b_coefficient;                   // 1/B * ln(R/Ro)
  temperature += 1.0 / (_nominal_temperature + 273.15); // + (1/To)
  temperature = 1.0 / temperature;                 // Invert
  temperature -= 273.15;                         // convert to C
  if (! getControllerConfig().isMetric) temperature = temperature * 1.8 + 32;
  #if DEBUG == 1
400
    Serial.print(F("THER I="));
DV's avatar
DV committed
401
    Serial.print(_child_id);
402
    Serial.print(F(" V="));
DV's avatar
DV committed
403
    Serial.print(adc);
404
    Serial.print(F(" T="));
DV's avatar
DV committed
405
    Serial.println(temperature);
406
    Serial.print(F(" M="));
DV's avatar
DV committed
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
    Serial.println(getControllerConfig().isMetric);
  #endif
  // store the value
  _value_float = temperature;
}

// what do to as the main task when receiving a message
void SensorThermistor::onReceive(const MyMessage & message) {
  onLoop();
}

/*
   SensorDigitalInput
*/

// contructor
SensorDigitalInput::SensorDigitalInput(int child_id, int pin): Sensor(child_id, pin) {
}

// what do to during setup
void SensorDigitalInput::onBefore() {
  // set the pin for input
  pinMode(_pin, INPUT);
}

// what do to during loop
void SensorDigitalInput::onLoop() {
  // read the value
  int value = digitalRead(_pin);
  #if DEBUG == 1
437
    Serial.print(F("D-IN I="));
DV's avatar
DV committed
438
    Serial.print(_child_id);
439
    Serial.print(F(" P="));
DV's avatar
DV committed
440
    Serial.print(_pin);
441
    Serial.print(F(" V="));
DV's avatar
DV committed
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
    Serial.println(value);
  #endif
  // store the value
  _value_int = value;
}

// what do to as the main task when receiving a message
void SensorDigitalInput::onReceive(const MyMessage & message) {
  onLoop();
}


/*
   SensorDigitalOutput
*/

// contructor
SensorDigitalOutput::SensorDigitalOutput(int child_id, int pin): Sensor(child_id, pin) {
}

void SensorDigitalOutput::onBefore() {
  // set the pin as output and initialize it accordingly
  pinMode(_pin, OUTPUT);
  digitalWrite(_pin, _initial_value == LOW ? LOW : HIGH);
  // the initial value is now the current value
  _value_int = _initial_value;
}

// setter/getter
void SensorDigitalOutput::setInitialValue(int value) {
  _initial_value = value;
}
void SensorDigitalOutput::setPulseWidth(int value) {
  _pulse_width = value;
}

// main task
void SensorDigitalOutput::onLoop() {
  // do nothing on loop
}

// what do to as the main task when receiving a message
void SensorDigitalOutput::onReceive(const MyMessage & message) {
  // retrieve from the message the value to set
  int value = message.getInt();
  if (value != 0 && value != 1) return;
  #if DEBUG == 1
489
    Serial.print(F("DOUT I="));
DV's avatar
DV committed
490
    Serial.print(_child_id);
491
    Serial.print(F(" P="));
DV's avatar
DV committed
492
    Serial.print(_pin);
493
    Serial.print(F(" S="));
DV's avatar
DV committed
494
    Serial.print(_initial_value);
495
    Serial.print(F(" V="));
DV's avatar
DV committed
496
    Serial.print(value);
497
    Serial.print(F(" P="));
DV's avatar
DV committed
498
499
500
501
502
503
    Serial.println(_pulse_width);
  #endif
  // set the value
  digitalWrite(_pin, value);
  if (_pulse_width > 0) {
    // if this is a pulse output, restore the value to the original value after the pulse
504
    wait(_pulse_width);
DV's avatar
DV committed
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
    digitalWrite(_pin, value == 0 ? HIGH: LOW);
  }
  // store the current value
  _value_int = value;
}

/*
   SensorRelay
*/

// contructor
SensorRelay::SensorRelay(int child_id, int pin): SensorDigitalOutput(child_id, pin) {
  // set presentation and type
  setPresentation(S_BINARY);
  setType(V_STATUS);
}

DV's avatar
DV committed
522
523
524
525
526
527
// define what to do during loop
void SensorRelay::onLoop() {
    // set the value to -1 so to avoid reporting to the gateway during loop
    _value_int = -1;
}

DV's avatar
DV committed
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
/*
   SensorLatchingRelay
*/

// contructor
SensorLatchingRelay::SensorLatchingRelay(int child_id, int pin): SensorRelay(child_id, pin) {
  // like a sensor with a default pulse set
  setPulseWidth(50);
}

/*
   SensorDHT
*/
#if MODULE_DHT == 1
// contructor
SensorDHT::SensorDHT(int child_id, int pin, DHT* dht, int sensor_type, int dht_type): Sensor(child_id, pin) {
  // store the dht object
  _dht = dht;
  // store the sensor type (0: temperature, 1: humidity)
  _sensor_type = sensor_type;
  _dht_type = dht_type;
  if (_sensor_type == 0) {
    // temperature sensor
    setPresentation(S_TEMP);
    setType(V_TEMP);
    setValueType(TYPE_FLOAT);
  }
  else if (_sensor_type == 1) {
    // humidity sensor
    setPresentation(S_HUM);
    setType(V_HUM);
    setValueType(TYPE_FLOAT);
  }
}

// what do to during setup
void SensorDHT::onBefore() {
    // initialize the dht library
    _dht->begin();
}

// what do to during loop
void SensorDHT::onLoop() {
  // temperature sensor
  if (_sensor_type == 0) {
    // read the temperature
    float temperature = _dht->readTemperature();
    // convert it
    if (! getControllerConfig().isMetric) temperature = temperature * 1.8 + 32;
    #if DEBUG == 1
578
      Serial.print(F("DHT I="));
DV's avatar
DV committed
579
      Serial.print(_child_id);
580
      Serial.print(F(" T="));
DV's avatar
DV committed
581
582
583
584
585
586
587
588
589
590
591
      Serial.println(temperature);
    #endif
    // store the value
    if (! isnan(temperature)) _value_float = temperature;
  }
  // humidity sensor
  else if (_sensor_type == 1) {
    // read humidity
    float humidity = _dht->readHumidity();
    if (isnan(humidity)) return;
    #if DEBUG == 1
592
      Serial.print(F("DHT I="));
DV's avatar
DV committed
593
      Serial.print(_child_id);
594
      Serial.print(F(" H="));
DV's avatar
DV committed
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
      Serial.println(humidity);
    #endif
    // store the value
    if (! isnan(humidity)) _value_float = humidity;
  }
}

// what do to as the main task when receiving a message
void SensorDHT::onReceive(const MyMessage & message) {
  onLoop();
}
#endif

/*
   SensorSHT21
*/
#if MODULE_SHT21 == 1
// contructor
DV's avatar
DV committed
613
SensorSHT21::SensorSHT21(int child_id, int sensor_type): Sensor(child_id,A2) {
DV's avatar
DV committed
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
  // store the sensor type (0: temperature, 1: humidity)
  _sensor_type = sensor_type;
  if (_sensor_type == 0) {
    // temperature sensor
    setPresentation(S_TEMP);
    setType(V_TEMP);
    setValueType(TYPE_FLOAT);
  }
  else if (_sensor_type == 1) {
    // humidity sensor
    setPresentation(S_HUM);
    setType(V_HUM);
    setValueType(TYPE_FLOAT);
  }
}

// what do to during setup
void SensorSHT21::onBefore() {
  // initialize the library
  Wire.begin();
}

// what do to during loop
void SensorSHT21::onLoop() {
  // temperature sensor
  if (_sensor_type == 0) {
    // read the temperature
    float temperature = SHT2x.GetTemperature();
    // convert it
    if (! getControllerConfig().isMetric) temperature = temperature * 1.8 + 32;
    #if DEBUG == 1
645
      Serial.print(F("SHT I="));
DV's avatar
DV committed
646
      Serial.print(_child_id);
647
      Serial.print(F(" T="));
DV's avatar
DV committed
648
649
650
651
652
653
654
655
656
657
658
      Serial.println(temperature);
    #endif
    // store the value
    if (! isnan(temperature)) _value_float = temperature;
  }
  // Humidity Sensor
  else if (_sensor_type == 1) {
    // read humidity
    float humidity = SHT2x.GetHumidity();
    if (isnan(humidity)) return;
    #if DEBUG == 1
659
      Serial.print(F("SHT I="));
DV's avatar
DV committed
660
      Serial.print(_child_id);
661
      Serial.print(F(" H="));
DV's avatar
DV committed
662
663
664
665
666
667
668
669
670
671
672
673
674
      Serial.println(humidity);
    #endif
    // store the value
    if (! isnan(humidity)) _value_float = humidity;
  }
}

// what do to as the main task when receiving a message
void SensorSHT21::onReceive(const MyMessage & message) {
  onLoop();
}
#endif

DV's avatar
DV committed
675
676
677
678
679
680
681
682
683
/*
 * SensorHTU21D
 */
 #if MODULE_SHT21 == 1
// constructor
SensorHTU21D::SensorHTU21D(int child_id, int pin): SensorSHT21(child_id, pin) {
}
#endif 

DV's avatar
DV committed
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
/*
 * SensorSwitch
 */
SensorSwitch::SensorSwitch(int child_id, int pin): Sensor(child_id,pin) {
  setType(V_TRIPPED);
}

// setter/getter
void SensorSwitch::setMode(int value) {
  _mode = value;
}
int SensorSwitch::getMode() {
  return _mode;
}
void SensorSwitch::setDebounce(int value) {
  _debounce = value;
}
void SensorSwitch::setTriggerTime(int value) {
  _trigger_time = value;
}
704
705
706
707
708
709
void SensorSwitch::setInitial(int value) {
  _initial = value;
}
int SensorSwitch::getInitial() {
  return _initial;
}
DV's avatar
DV committed
710
711
712
713
714
715
716
717
718
719
720

// what do to during setup
void SensorSwitch::onBefore() {
  // initialize the value
  if (_mode == RISING) _value_int = LOW;
  else if (_mode == FALLING) _value_int = HIGH;
}

// what do to during loop
void SensorSwitch::onLoop() {
  // wait to ensure the the input is not floating
721
  if (_debounce > 0) wait(_debounce);
DV's avatar
DV committed
722
723
724
725
726
  // read the value of the pin
  int value = digitalRead(_pin);
  // process the value
  if ( (_mode == RISING && value == HIGH ) || (_mode == FALLING && value == LOW) || (_mode == CHANGE) )  {
    #if DEBUG == 1
727
      Serial.print(F("SWITCH I="));
DV's avatar
DV committed
728
      Serial.print(_child_id);
729
      Serial.print(F(" P="));
DV's avatar
DV committed
730
      Serial.print(_pin);
731
      Serial.print(F(" V="));
DV's avatar
DV committed
732
733
734
735
      Serial.println(value);
    #endif
    _value_int = value;
    // allow the signal to be restored to its normal value
736
    if (_trigger_time > 0) wait(_trigger_time);
DV's avatar
DV committed
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
  } else {
    // invalid
    _value_int = -1;
  }
}
// what do to as the main task when receiving a message
void SensorSwitch::onReceive(const MyMessage & message) {
  onLoop();
}

/*
 * SensorDoor
 */
SensorDoor::SensorDoor(int child_id, int pin): SensorSwitch(child_id,pin) {
  setPresentation(S_DOOR);
}

/*
 * SensorMotion
 */
SensorMotion::SensorMotion(int child_id, int pin): SensorSwitch(child_id,pin) {
  setPresentation(S_MOTION);
  // capture only when it triggers
  setMode(RISING);
761
762
  // set initial value to LOW
  setInitial(LOW);
DV's avatar
DV committed
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
}

/*
   SensorDs18b20
*/
#if MODULE_DS18B20 == 1
// contructor
SensorDs18b20::SensorDs18b20(int child_id, int pin, DallasTemperature* sensors, int index): Sensor(child_id, pin) {
  setPresentation(S_TEMP);
  setType(V_TEMP);
  setValueType(TYPE_FLOAT);
  _index = index;
  _sensors = sensors;
}

// what do to during setup
void SensorDs18b20::onBefore() {
}

// what do to during loop
void SensorDs18b20::onLoop() {
  // request the temperature
  _sensors->requestTemperaturesByIndex(_index);
  // read the temperature
  float temperature = _sensors->getTempCByIndex(_index);
  // convert it
  if (! getControllerConfig().isMetric) temperature = temperature * 1.8 + 32;
  #if DEBUG == 1
791
    Serial.print(F("DS18 I="));
DV's avatar
DV committed
792
    Serial.print(_child_id);
793
    Serial.print(F(" T="));
DV's avatar
DV committed
794
795
796
797
798
799
800
801
802
803
    Serial.println(temperature);
  #endif
  // store the value
  _value_float = temperature;
}

// what do to as the main task when receiving a message
void SensorDs18b20::onReceive(const MyMessage & message) {
  onLoop();
}
DV's avatar
DV committed
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
#endif

/*
   SensorBH1750
*/
#if MODULE_BH1750 == 1
// contructor
SensorBH1750::SensorBH1750(int child_id): Sensor(child_id,A4) {
  setPresentation(S_LIGHT_LEVEL);
  setType(V_LEVEL);
  _lightSensor = new BH1750();
}

// what do to during setup
void SensorBH1750::onBefore() {
  _lightSensor->begin();
}

// what do to during loop
void SensorBH1750::onLoop() {
  // request the light level
  _value_int = _lightSensor->readLightLevel();
  #if DEBUG == 1
827
    Serial.print(F("BH1 I="));
DV's avatar
DV committed
828
    Serial.print(_child_id);
829
    Serial.print(F(" L="));
DV's avatar
DV committed
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
    Serial.println(_value_int);
  #endif
}

// what do to as the main task when receiving a message
void SensorBH1750::onReceive(const MyMessage & message) {
  onLoop();
}
#endif

/*
   SensorMLX90614
*/
#if MODULE_MLX90614 == 1
// contructor
SensorMLX90614::SensorMLX90614(int child_id, Adafruit_MLX90614* mlx, int sensor_type): Sensor(child_id,A4) {
  // store the sensor type (0: ambient, 1: object)
  _sensor_type = sensor_type;
  _mlx = mlx;
  // set presentation and type
  setPresentation(S_TEMP);
  setType(V_TEMP);
  setValueType(TYPE_FLOAT);
}
DV's avatar
DV committed
854

DV's avatar
DV committed
855
856
857
858
859
860
861
862
863
864
865
866
// what do to during setup
void SensorMLX90614::onBefore() {
  // initialize the library
  _mlx->begin();
}

// what do to during loop
void SensorMLX90614::onLoop() {
  float temperature = _sensor_type == 0 ? _mlx->readAmbientTempC() : _mlx->readObjectTempC();
  // convert it
  if (! getControllerConfig().isMetric) temperature = temperature * 1.8 + 32;
  #if DEBUG == 1
867
    Serial.print(F("MLX I="));
DV's avatar
DV committed
868
    Serial.print(_child_id);
869
    Serial.print(F(" T="));
DV's avatar
DV committed
870
871
872
873
    Serial.println(temperature);
  #endif
  if (! isnan(temperature)) _value_float = temperature;
}
DV's avatar
DV committed
874

DV's avatar
DV committed
875
876
877
878
// what do to as the main task when receiving a message
void SensorMLX90614::onReceive(const MyMessage & message) {
  onLoop();
}
DV's avatar
DV committed
879
880
#endif

881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923

/*
   SensorBME280
*/
#if MODULE_BME280 == 1
// contructor
SensorBME280::SensorBME280(int child_id, Adafruit_BME280* bme, int sensor_type): Sensor(child_id,A4) {
  // store the sensor type (0: temperature, 1: humidity, 2: pressure)
  _sensor_type = sensor_type;
  if (_sensor_type == 0) {
    // temperature sensor
    setPresentation(S_TEMP);
    setType(V_TEMP);
    setValueType(TYPE_FLOAT);
  }
  else if (_sensor_type == 1) {
    // humidity sensor
    setPresentation(S_HUM);
    setType(V_HUM);
    setValueType(TYPE_FLOAT);
  }
  else if (_sensor_type == 2) {
    // pressure sensor
    setPresentation(S_BARO);
    setType(V_PRESSURE);
    setValueType(TYPE_FLOAT);
  }
}

// what do to during setup
void SensorBME280::onBefore() {
  // initialize the library
}

// what do to during loop
void SensorBME280::onLoop() {
  // temperature sensor
  if (_sensor_type == 0) {
    // read the temperature
    float temperature = _bme->readTemperature();
    // convert it
    if (! getControllerConfig().isMetric) temperature = temperature * 1.8 + 32;
    #if DEBUG == 1
924
      Serial.print(F("BME I="));
925
      Serial.print(_child_id);
926
      Serial.print(F(" T="));
927
928
929
930
931
932
933
934
935
936
937
      Serial.println(temperature);
    #endif
    // store the value
    if (! isnan(temperature)) _value_float = temperature;
  }
  // Humidity Sensor
  else if (_sensor_type == 1) {
    // read humidity
    float humidity = _bme->readHumidity();
    if (isnan(humidity)) return;
    #if DEBUG == 1
938
      Serial.print(F("BME I="));
939
      Serial.print(_child_id);
940
      Serial.print(F(" H="));
941
942
943
944
945
946
947
948
949
950
951
      Serial.println(humidity);
    #endif
    // store the value
    if (! isnan(humidity)) _value_float = humidity;
  }
  // Pressure Sensor
  else if (_sensor_type == 2) {
    // read humidity
    float pressure = _bme->readPressure() / 100.0F;
    if (isnan(pressure)) return;
    #if DEBUG == 1
952
      Serial.print(F("BME I="));
953
      Serial.print(_child_id);
954
      Serial.print(F(" P="));
955
956
957
958
959
960
961
962
963
964
965
966
967
      Serial.println(pressure);
    #endif
    // store the value
    if (! isnan(pressure)) _value_float = pressure;
  }
}

// what do to as the main task when receiving a message
void SensorBME280::onReceive(const MyMessage & message) {
  onLoop();
}
#endif

DV's avatar
DV committed
968
969
970
971
972
973
974
975
976
977
978
979
980
981
/*******************************************
   NodeManager
*/

// initialize the node manager
NodeManager::NodeManager() {
  // setup the service message container
  _msg = MyMessage(CONFIGURATION_CHILD_ID, V_CUSTOM);
}

// setter/getter
void NodeManager::setRebootPin(int value) {
    _reboot_pin = value;
}
DV's avatar
DV committed
982
983
984
void NodeManager::setRetries(int value) {
  _retries = value;
}
DV's avatar
DV committed
985
986
987
988
989
990
991
992
993
994
#if BATTERY_MANAGER == 1
  void NodeManager::setBatteryMin(float value) {
    _battery_min = value;
  }
  void NodeManager::setBatteryMax(float value) {
    _battery_max = value;
  }
  void NodeManager::setBatteryReportCycles(int value) {
    _battery_report_cycles = value;
  }
995
996
997
998
999
1000
  void NodeManager::setBatteryInternalVcc(bool value) {
    _battery_internal_vcc = value;
  }
  void NodeManager::setBatteryPin(int value) {
    _battery_pin = value;
  }